| 1. |
Takagishi H, Noge H, Saito K, Kondo M, Fabrication of interdigitated back-contact silicon heterojunction solar cells on a 53 µm-thick crystalline silicon substrate by using the optimized inkjet printing method for etching mask formation, Jpn. J. Appl. Phys., 56, 040308 (2017) |
| 2. |
斉藤公彦，樋口登，山崎治郎，吉野大志，近藤道雄, 太陽電池ミニモジュールによる太陽光発電システムの期待発電量計測, 電気学会論文誌Ｂ, 136巻 No.11 pp.846-847 (2016) |
| 3. |
高岸秀行，野毛宏，斉藤公彦，近藤道雄，インクジェット印刷を用いた結晶シリコン太陽電池の作製技術，ケミカルエンジニヤリング, 61巻 No.8 pp.48-53 (2016) |
| 4. |
Noge H, Saito K, Sato A, Kaneko T, Kondo M, Two-dimensional simulation of interdigitated back contact silicon heterojunction solar cells having overlapped p/i and n/i a-Si:H layers, Jpn. J. Appl. Phys., 54, 08KD17 (2015) |
| 5. |
Matsui T, Maejima K, Bidiville A, Sai H, Koida T, Suezaki T, Matsumoto M, Saito K, Yoshida I, Kondo M, High-efficiency thin-film silicon solar cells realized by integrating stable a-Si:H absorbers into improved device design, Jpn. J. Appl. Phys., 54, 08KB10 (2015) |
| 6. |
Sai H, Matsui T, Saito K, Kondo M, Yoshida I, Photocurrent enhancement in thin-film silicon solar cells by combination of anti-reflective sub-wavelength structures and light-trapping textures, Progress in Photovoltaics, Research and Applications, Vol.23,p1572-1580（2015） |
| 7. |
Matsui T, Bidiville A, Maejima K, Sai H, Koida T, Suezaki T, Matsumoto M, Saito K, Yoshida I, Kondo M, High-efficiency amorphous silicon solar cells: Impact of deposition rate on Metastability, Appl. Phys. Lett. 106, 053901 (2015) |
| 8. |
金子哲也, 佐藤愛子, 野毛宏, 斉藤公彦, 近藤道雄,インクジェット印刷を利用したパターニングによる裏面電極型ヘテロ接合Si太陽電池の作製プロセス構築,電子情報通信学会論文誌C, J97-C, 277-278 (2014) |
| 9. |
Maejima K, Koida T, Sai H, Matsui T, Saito K, Kondo M, Takagawa T, Influences of deposition temperature on characteristics of B-doped ZnO films deposited by metal-organic chemical vapor deposition, Thin Solid Films 559, 83-87 (2014) |
